Rating
Axial Flow Fan Design
Axial Flow Fan Design
Mixed Flow Fan
A new high pressure MVA series mixed flow in-line fans finally resolves the problem of pushing air through high resistance and long ventilation ducts.Mixed Flow fans are an excellent choice for return air, supply, or general ventilation applications where low sound is critical. As compared to similarly sized tubular centrifugals and vane axials, a mixed flow fan will be 5-20 dB quieter! In addition, the mixed flow wheel is extremely efficient and will cut down on operating expenses.
Unique features of the MVA Mixed Flow Fans include:
- Universal Mounting System that allows the unit to be field rotated at the job site
- Compact design with standard slip-fit duct connections for ease of installation
- UL/CSA listing for electrical is available
- Continuously welded housing with a standard powder paint finish suitable for indoor or outdoor applications
- A complete three plane vibration test of all assembled fans prior to shipment
Model MVAB:
* Belt drive construction with motor out of the airstream
* Air Handling Quality bearings selected with a minimum life in excess of L(10) 50,000 hours at the maximum operating speed
* Performance capacities from 1,000 to 100,000 cfm (1,700 – 165,000 m3/hour) and pressures up to 8 in. wg. (2000 Pa)
Model MVAD:
* Direct drive construction eliminates belts, pulleys, and shaft bearing maintenance
* MVAD design is more compact for space critical application
* Partial wheel widths allow for wide performance capacities ranging from 500 to 105,000 cfm (900 – 170,000 m3/hour) and pressures up to 9 in. w.g. (2300PA)
Another in-line fan for for air moving in round ducts by Tenderall Fan Co. is a high pressure small vaneaxial fan finally resolves the problem of boosting air flow in long ventilation ducts of today’s large residential houses.For a long time the efficient ventilation of remote rooms in the large houses could be done only with two independent air supply sources (like a furnace). Ventilating ductwork in contemporary large houses becomes so long and elaborated that even a high pressure furnace fan couldn’t generate enough static pressure to blow through the whole length of such a duct. The existing low pressure booster duct fans, even though compact enough to be installed in-line in the house ventilation ductwork, still do not provide enough booster pressure / airflow. The usual solution to this problem was installation of two independent furnaces with different air ducts, which is rather expensive option.
A new high pressure (up to 1.5″ WG) small vaneaxial Series VA fan is an ideal booster fan for prolonged ducts. Unlike inline centrifugal ventilator, that also generates rather high pressure, the air comes out not from a peripheral outlet ring area, but distributes evenly across its outlet opening like in true axial blowers.
The other advantages of VA Series vaneaxial ventilators is their intrinsic spark-resistant construction because of all-aluminum construction; quiet operation of true vaneaxial design; lower energy consumption due to efficient wheel design.Eight different sizes from 6″ DIA to 10″ DIA offer wide performance range for any ventilation duct design. Direct drive design ensures long live, maintenance-free operation. Explosion proof motors are available too, as well as sliding dampers, various mounting options, additional sound isolation.
For additional information please refer to http://www.tenderall.com/airhandler/index.html.
Oleg Chetchel
Canadian Air Process Engineer
Tenderall Fan Co.
http://www.tenderall.com/blower/index.html
http://www.tenderall.com/fanblower/index.html
About the Author
Oleg Chetchel
Ventilation Equipment Designer
Tenderall Fan Co.
http://tenderall.com
|
|
5.25IN System Cooling Tray Dual Fan Black $15.00 Keep your system cool all the time! This DataStor USCTXX dual fan system cooling trayfeatures two 3.54-inch fans, 80 CFM air flow and spins at 2100 RPM speeds!In most instances, the dual fans can lower the case temperatureby as much as 15 degrees, maintaining cool air circulation! Installation is easy, simply slide the tray into any available 5.25-inch bay, fasten the screws, connect it to the pow… |
|
|
Panaflo 12 VDC Fan Matsushita FBA09A12H with Guard 92 x 25mm $12.99 92 mm sq. x 25 mm thick 12V DC brushless axial fan with Hydro Wave bearing. * Rated voltage: 12 VDC * Operation voltage: 7 ~ 13.8 VDC * Rated current: 0.225 A * Rated input: 2.7 W * Speed: 2850 RPM * Max air flow: 56.8 CFM * Acoustical noise: 35.0 dB-A… |
|
|
Fan Handbook: Selection, Application, and Design $63.78 Here is the first comprehensive guide to all aspects of modern fan technology. The book takes you through the design, selection, maintenance, and repair of fans used in a wide range of applications and industries, including airfoils…centrifugal fans…mixed-flow fans…roof ventilators…cross-flow blowers…regenerative blowers… and more. You’ll find information on fan codes, standards, and s… |
|
|
Turboblowers: Theory, Design, and Application of Centrifugal and Axial Flow Compressors and Fans … |
|
|
Fluid Machinery: Performance, Analysis, and Design $97.01 Fluid Machinery: Performance, Analysis, and Design provides a comprehensive introduction to the fluid mechanics of turbomachinery. By focusing on the preliminary design and selection of equipment to meet a set of performance specifications-including size, noise, and cost limitations-the author promotes a basic but thorough understanding of the subject. His pragmatic approach exposes students to a … |
Have A Question?
Are you looking for something but can not find it, or have a question for us? We would love to help you. Just fill out the form below and we will get back to you as soon as possible.
