Rating
Axial Accessories
Axial Accessories
High Temperature Industrial Axial Ventilators
Northen Industrial Co. now offers high temperature construction on its axial fans. There are a few steps of fan heat construction available: 200 F, 725 F, 800 F. High temperature inline fans are ideal for industrial oven and dryer exhaust systems where pressure requirements are minimal and compact light-weight designs are advantageous.
200 F High Temperature Duct Fans come with special heat bearings and a belt drive with increased safety factor.
650 F Tubeaxial Fan design involves special belt tunnel cooling system that induces a flow of cooler, ambient air through the belt well and inner tube, cooling the fan’s internal components. Depending on temperature requirements, modifications include high-temperature alloy fan wheel, special drive components, and modifications to provide internal ambient air cooling.
Fans with ambient air cooling systems handling hot airstreams must have sufficient airflow and be kept in operation until airstream temperatures cool below 120 F to prevent damage to the fan unit. The Tubeaxial fan ambient air cooling system is only effective while fan is operating.
800 F Vaneaxial Fans are designed to operate continuously at temperatures to 800 deg. F, and include an auxiliary cooling fan that forces air through the bearing compartment and exits out through the insulated belt opening taking away excessive heat from the shaft and bearings. A high temperature shaft seal is also standard on this design.
Fans handling hot airstreams must have sufficient airflow and be kept in operation until airstream temperatures cool below 120 F to prevent damage to the fan unit. The Tubeaxial fan ambient air cooling system is only effective while fan is operating.
The Northen Industrial complete high temperature fans line now include:
- Operating up to 2200 F, centrifugal, axial and plug fan types;
- Pre-engineered and custom made fans for all types of applications with vaiety of impeller types and accessories;
- Northen Industrial engineers provide a professional advice and recommend a right fan for every application & oven / plenum design;
- The fan offering provides competitive replacement fans to Garden City, Lau, IGE, Alloy Fabricating fan models; repairs, re-build & balancing;
- Unique high temperature water-cooled motors for operation up to 2300 F;
in the two major types of high temperature fans – centrifugal and axial:
Centrifugal Wheels:
* Multiblade forward curve wheel. This type of wheel is usually specified where there is a necessity for large volumes of flow against low to medium static pressure requirements. The forward curve blade is that it delivers the same volume of air as either the backward or radial blade wheel, at a lower fan speed, which is important due to wheel stresses at elevated temperatures. This fan is the most common type used in all types of heat treatment operations except where a buildup of material on the blades could occur, as wheel unbalance would result.
* Radial Blade, paddle wheel type fans. This type of wheel is usually specified where there is a necessity for medium volumes of flow against medium to large static pressures. The paddle wheel is considered a self cleaning type of wheel. It could be used where there are various materials or dust in the air stream. Due to its structurally strong design, it is used in many heat treatment applications at very high temperatures where maximum fan longevity is desired.
Axial Blade Wheels:
* The axial blade wheel is usually specified where there is a need for very large volumes of flows against low static pressure. Axial wheel like the multi-blade forward curve type wheel could cause an axial fan to deliver different air volumes at the same static pressure, if the total pressure requirement of the fan system was underestimated. This type of fan is ideally suited where a large volume of flow is required with a minimum of duct work and is used extensively for small and large furnaces, such as aluminum annealing.
For additional information please refer to http://northernindustrialsupplycompany.com/products/industrialfan_blowers.html.
Oleg Cthetchel
Canadian process air systems developer
Northen Industrial Co.
http://northernindustrialsupplycompany.com/products/index.html
http://northernindustrialsupplycompany.com/manufacturers.html
About the Author
Oleg Cthetchel
Canadian process air systems developer
Northen Industrial Co.
http://northernindustrialsupplycompany.com/products/index.html
http://northernindustrialsupplycompany.com/manufacturers.html
Axial scx10 crawler,
|
|
S&P 12 inch Axial Wire Protection Guard These Compact Wall and Duct Axial Fans by S&P are designed for industrial and commercial applications. The WA Series is for wall mount applications and the DA Series is for duct mount applications. Extremely compact design created by the combination of an external rotor motor matched with a direct drive wrap around an impeller hub. This very low profile design optimizes airflow performance while m… |
|
|
S&P 12 inch Round Duct Matching Flange $46.81 These Compact Wall and Duct Axial Fans by S&P are designed for industrial and commercial applications. The WA Series is for wall mount applications and the DA Series is for duct mount applications. Extremely compact design created by the combination of an external rotor motor matched with a direct drive wrap around an impeller hub. This very low profile design optimizes airflow performance while m… |
|
|
S&P 12 inch Tubular Duct – Drive Axial – 1216 CFM $414.16 These Compact Wall and Duct Axial Fans by S&P are designed for industrial and commercial applications. The WA Series is for wall mount applications and the DA Series is for duct mount applications. Extremely compact design created by the combination of an external rotor motor matched with a direct drive wrap around an impeller hub. This very low profile design optimizes airflow performance while m… |
|
|
AR Blue Clean AR383 1,900 PSI 1.5 GPM 14 Amp Electric Pressure Washer with Hose Reel $153.72 This AR Blue Clean Electric Pressure Washer gives you the power and convenience you need with a built-in hose reel and accessory storage that keep essentials organized and easy to access. Pressure (PSI): 1,900, Flow (GPM): 1.6, Motor: Universal, HP: 1.5, Volts: 110, Amps: 12, Pump: Axial radial, Drive: Direct, Gun: AR easy trigger auto stop, Nozzle Type: Variable angle spray, Orifice Size: 1.10, H… |
|
|
Bosch GCM12SD 120-Volt 12-Inch DB Glide Miter Saw $1,528.00 The 12-Inch Dual-Bevel Glide Miter Saw features the smooth cutting motion, accurate performance, and space-saving design of Bosch’s patented Axial-Glide System. Pre-aligned Squarelock fences help the saw maintain precision throughout its life, and a soft-grip ambidextrous handle and combination dust chute and vacuum adaptor provide user comfort. The saw also offers a large cutting capacity, easy-t… |
|
|
Power Boss 020309 3,000 PSI 2.5 GPM 187cc Honda GC190 Gas Powered Pressure Washer $479.97 Includes 3,000 PSI Gas Pressure Washer – 20309, (4) Quick-Connect Spray Tips, 25-ft High-Pressure Hose… |
|
|
2011 Newest!!! 100% Genuine Original Brand New Parkflyers Avatar Z008 Infrared Co-axial RTF Micro Mini Remote Control RC R/C Helicopter with Gyro Red 4 Channel $16.95 This palm size helicopter 4 channel helicopter is amazing! This tiny heli is able to move in 6 directions, including spinning on its own axis, just like the real thing! The light but strong metal body frame protects the helicopter from those inevitable crashes, though not indestructible it won’t break easily. The blades too are made of a flexible plastic and so are much more able to survive any co… |
|
|
Axial SCX10, TR Alum. Upgrade Link Set 313mm WB AX30550 $49.99 Axial TR Aluminum Upgrade Links Set, 12.3(313mm) Wheel Base for the Axial SCX10. #AX30550Manuf. Notes:SCX10 TR Aluminum Links Upgrade Set Upgrades your SCX10 TR to all aluminum linksIncludes the hardware and links needed to upgrade to a 3 link OR 4 link setup using the 4 link mount included with the TR series of productTwo different wheelbases available11.4 (290mm) WB Fits Dingo body and other sho… |
|
|
Pro-Line Racing 3255-00 Early 50′s Chevy Clear Body $19.27 Pro-Line welcomes you back to the future of automobiles with the release of the Early 50′s Chevy® for the Electric and Nitro Stampede®…. |
|
|
The 2006-2011 World Outlook for Penthouses, Shutters, Guards, and Other Parts and Accessories for Industrial Centrifugal, Axial, and Propeller Fans and Blowers Excluding Power Roof Ventilators $795.00 WHAT IS LATENT DEMAND AND THE P.I.E.?The concept of latent demand is rather subtle. The term latent typically refers to something that is dormant, not observable, or not yet realized. Demand is the notion of an economic quantity that a target population or market requires under different assumptions of price, quality, and distribution, among other factors. Latent demand, therefore, is commonly def… |
Have A Question?
Are you looking for something but can not find it, or have a question for us? We would love to help you. Just fill out the form below and we will get back to you as soon as possible.
