Axial Ax10 Scorpion Rock Crawler
Axial Ax10 Scorpion Rock Crawler
Axial Ax 10 scorpion Rock Crawler and its friends
|
|
Axial Racing AX10 1/10 Ready-to-Crawl Scorpion with 2.4GHz Radio $484.99 * Completely Ready-to-Crawl (RTC) out of the box * 70 of articulation and 68mm (2.7 ) of ground clearance * Mount a standard stick pack to get up and running quickly, or use the included upper link plate to mount smaller batteries lower in the chassis for improved crawling performance * 55T electric motor tear up the terrain in-door or out-doors. Easy Operation no tuning, no fuel, no loud exhaust … |
|
|
Axial Racing RTR 1/10 SCX10 with Trail Honcho Body $584.99 The latest SCX10 is inspired by off-road vehicles that are basically part truck and part buggy, nicknamed “truggies”. The new Axial SCX10 is the kit to have when it comes to having a realistic looking truggy. Scale features such as the steel c-channel ladder frame, plastic molded cage, and plastic front bumper with aluminum skid plates are included in this kit. These are just a few of the features… |
|
|
Axial AX10 Scorpion 1/10 Rock Racer/Crawler RTR The AX10 Scorpion from Axial AX1O SCORPION ROCK RACER (RTR) Purpose built for the Rocks! Going Places Where Others Can t Based upon the popular competition-ready AX10 Kit, the AX10 Scorpion is Ready-to-Run with 2 configurations! Rock Crawler Takin it slow – swap out the 20t pinion for the 14t pinion and install the front locker (included). The Rear locker is already installed. This will give you… |
Cen Racing Fun Factor
Cen Racing Fun Factor
Cen Racing Buggy Video (Fun Factor ATX)
|
|
CEN Fun Factor 16T Threaded Pinion M10, use with FFS001 $8.39 … |
|
|
CEN Fun Factor 17T Threaded Pinion M10, use with FFS001 $8.39 … |
|
|
CEN Fun Factor Rear Toe-In Tie Rod (Buggy/Rally) $14.99 Rear toe-in tie-rod for Fun Factor Buggy/Rally…. |
Duratrax Delphi
Duratrax Delphi
|
|
Duratrax Tire w/Foam Insert Delphi Indy Car (4) $14.29 This is a set of four Tires w/Foam Inserts for the DuraTrax / 1/10 Scale Indy Car. / / FEATURES: Tires with foam inserts for the DuraTrax 1/10 scale electric Indy / car (DTXD12**). / High grip, directionally treaded tires. / DuraTrax logo on sidewalls. / White foam inserts. / / INCLUDES: Two Rear Tires / Two Front Tires / / REQUIRES: CA Glue, GPMR6001 / / SPECS: Front: Re… |
|
|
Turnbuckle Tie-Rod Set Delphi Indy Car (2) $4.49 These are optional Turnbuckle Tie Rods for the Duratrax Delphi Indy. / / FEATURES: Pre-assembled tie rods / Steel construction / Nylon / / INCLUDES: Two tie rods / / REQUIRES: Duratrax Delphi Indy / / SPECS: Length: 63.5 mm (2.5″”) / Diameter: 6.82 mm (0.268″”) / Adjustment Square Size: 3.45 mm (0.136″”) / / / jmm 1/29/03 / ir/jxs… |
|
|
Duratrax Tie-Rod w/Ball Cups Delphi Indy Car (2) $2.20 This the Tie Rod Set w/Ball Cups for the / Delphi Indy Car (DTXC0012). / / FEATURES: Steel and nylon construction. / / INCLUDES: Two tie rods with pre-installed ball cups. / / REQUIRES: Installing on vehicle. / / SPECS: Length: 65mm long (adjustable). / tjt 011003 / ir/jxs… |
Axial Flow
Axial Flow
Axial FRP Fans and Ventilators by Canada Blower
Canada Blower fans are the finest quality blowers available for efficient movement of corrosive, humid, or polluted air, gases, and fumes. These fire-retardant and corrosion-resistant plastic fans are specially designed and especially suited for hostile applications where coated metal blowers typically corrode. Canada Blower fans are proven thoughout the world and clearly recognized for superior quality, reliability, and efficiency.
The axial flow fans are widely used for providing the required airflow for heat & mass transfer operations in various industrial equipment and processes. These include cooling towers for air-conditioning & ventilation, humidifiers in textile mills, air-heat exchangers for various chemical processes, ventilation & exhaust as in mining industry etc. All the major industries use large number of axial flow fans for operations, such as :
- Power Generation Facilities
- Petroleum Refining & Petrochemicals
- Cement Industry
- Chemicals & Pharmaceuticals
- Fertilizer Production
- Mining Industries
- Institutional Ventilation, etc..
Fiberglass Reinforced Plastics (FRP) provide the desired non-corrosive quality to the fan blades, resulting the operation of fans even in the very aggressive environment. Lightweight FRP fans also ensure a low moment of inertia, minimum wear & stress on motor, bearing and drive system.
Hollow FRP blades reduce material & installation costs and possibility of damage to the fan & drive during sudden stops. Composite structural design can be tailor made by using glass fibres in various forms (woven mat & rovings) in right direction while moulding the impeller with resin thus imparting the desired mechanical strength by improving its structural stability and enhanced mechanical properties.
Aerofoil design of fan impellers ensures higher efficiency, lower noise levels & less power consumption. The aerodynamically designed impellers of fans, fabricated by composite material can be an excellent alternative to ensure enhanced efficiency & appropriate energy savings apart from a wide gamut of critical advantages.
The FRP fans offer certain critical advantages as mentioned hereunder:
- Optimal aerodynamic design of fan impellers to provide higher efficiency for any specific application.
- Reduction in overall weight of the fan, thereby extending the life of mechanical drive systems.
- Require lower drive motor rating and light duty bearing system.
- Low power consumption resulting in appreciable energy savings.
- FRP fans fabricated by compression moulding/resin transfer moulding technique would have uniform dimensions and consistent quality.
- Lower flow noise and mechanical noise levels compared to the conventional metallic fans.
- Longer life of fans due to improved mechanical strength.
The potential of FRP composite for various applications is very wide. In view of the crucial need for developing indigenous capability in composite technology the main advantage of FRP fans is their utilization and application of composite as an important performance material in various sectors and to improve upon the laboratory-industry linkages towards development & commercialisation.
Canada Blower is a major supplier of plastic and fiberglass fans and blowers for industry applications where aggressive media must be moved. Plastic fans include polypropelene, PVC, PVDF, fire retardant and UV resistant PPs.
Some applications for Corrosion and Chemical Resistant Fans worth to mention here are:
* University, Medical Research, Defence Labs, Fume Hoods OEMs, Pharmaceutical Labs
* High Technology Semiconductors, PCBs, and Photonics
* Printed Circuit Board Industry
* Waste water and Sewage Treatment Plants
* Salt Air and High Humidity Environments
* Steel and Wire Manufacturing
* Stainless Steel and other Metal Production Facilities
* Chemical and Petrochemical Industries
* Jet Engine and Power Plant Turbine Manufacturing or Servicing
* Electroplating and Metal Finishing
* Scrubber OEMs and Designers
* Industrial Galvanizers
* Printing Press Service Shops
* Chromatography
* Food Processing
* Pulp and Paper Industry
Tough applications mean tough fans and blowers by Canada Blower Co. Canada Blower is a world wide distributor of industrial process ans OEM fans and blowers, as well as fan / blower components; including high pressure blowers, high temperature fans, spark resistant and explosion proof ventilators, tubeaxial and vaneaxial high pressure ventilators. Canada Blower also does existing fans and blowers repairs, re-build, as well as dynamical wheels balancing.
For additional information please refer to http://www.canadablower.com/index.html.
Susan Terlitski
Ventilation Equipment Developer
Canada Blower Co.
http://www.canadablower.com/blowers/index.html
http://www.canadablower.com/fans/index.html
About the Author
Canadian air-handling systems designer.
Mrs. Siouzanna Terlitskaia, nis-co@nis-co.com
Canadian Air Systems
http://nis-co.com
axial flow 8120 coupe(extensible) au blé
|
|
110V / 115V / 120V AC Cooling Fan. 120mm x 38mm HS + Power Plug Cord Overview The high speed 120 by 120 by 38 millimeter 115V AC cooling fan has terminal connectors and can run on 100 to 125 voltages. The fan contains long life dual ball bearings rated at 67,000 hours and can be mounted in any direction. Its housing is constructed of die-cast aluminum and blades molded of thermoplastic. Includes a 4 feet power plug cord that easily attaches to the fan and can be pl… |
|
|
Axial Flow $6.99 … |
|
|
6-Inch 110VAC 250 CFM In-Line Duct Fan $24.99 Imagine being able to walk into a room, press a button and have the airflow only to that room immediately boosted by up to 80%, quietly. Increase ventilation to selected areas when guests are over, equalize temperatures in rooms that are too hot or too co… |
|
|
MaxxAir HVHF 08COMBO Heavy Duty 8-Inch Cylinder Fan with 20-foot Vinyl Hose, Yellow $171.40 … |
|
|
Tjernlund Duct Booster Fan – 300 CFM, 120 Volt $57.58 Fans boost air flow in hard to heat or cool rooms. Install easily in both metal and flex round duct. 8in. fan has 120 Volt, 56 Watt motor, moves 300 CFM through 25ft. of straight duct. U.S.A. Auto and Manual: Yes, CFM: 300, Works With: Heating ducts, Motor: 56 Watt motor, Mount Type: Hardwired or wire to an off and on switch (special order), Dimensions L x W x H (in.): 8in. Diameter and 9in. Len… |
|
|
Thermocool Axial Cooling Fan 110V 57CFM 4.72 X 4.72 $8.60 __Thermocool Axial Fans provide enhanced cooling for a variety of electronic devices. Leading air flow technology is designed into every Thermocool product resulting in reduced turbulence, low noise levels and a more energy efficient product. Thermocool fans are ideal for use in computer systems, portable CD and DVD players, stereo components, overhead projectors, laptop computers, and many other … |
|
|
AVC 40mm x 28mm 1U Axial Fan $6.00 This is New AVC 40mm x 28mm 1U Axial Fan pulled out of from our 1U chassis. It is a high-end 40mm DC Fan and UL , CSA, Intel approved with 3-pin connector…. |
|
|
Lian-Li Aluminum PCI Cooling Kit Model BS-03X Black $24.99 Lian-Li Aluminum PCI Cooling Kit Model BS-03X Black Specialty Cooling fan, housing and grill made to install in newer Lian Li Cases. Attaches inside to back of case where perforated holes vent to outside. See pictures for a closer look Large 12cm axial fan sucks hot air up from expansion cards and exhausts out the back of the case. This is same fan assembly found in Plus II and other newer Lia… |
|
|
1:32 Case IH 9120 Tracked Combine $64.35 CIH combine enthusiasts will appreciate the level of detail in the Prestige 1/32 CIH 9120 tracked combine. The 9120 axial flow combine is the peak of CIH combine development. The combine comes with a 16 row corn head and 35 foot grain platform which attach to the pivoting feeder housing on the combine. The combine has a rear opening panel for a fold down ladder to allow the operator access to the … |
|
|
Thermocool Axial Cooling Fan 110V 19CFM 3.15 X 3.15 $8.00 Thermocool Axial Fans provide enhanced cooling for a variety of electronic devices. Leading air flow technology is designed into every Thermocool product resulting in reduced turbulence, low noise levels and a more energy efficient product. Thermocool fans are ideal for use in computer systems, portable CD and DVD players, stereo components, overhead projectors, laptop computers, and many other el… |
Electric Rc Trucks Off Road
Electric Rc Trucks Off Road
The Heart of Your RC Car
Today the kids and adults are alike in terms of their past time. Both are engaged in radio controlled cars. They purchase these cars at the toy stores. RC cars provide an endless amount of thrill and excitement and serve as their leisure.
Radio controlled cars are consist of two units which is the car itself and the radio controller. Some radio controlled cars are powered by rechargeable batteries and some were powered by batteries with actual gas-powered engines. Gas powered engines are more expensive than electric powered engines.
RC cars are of different types. There’s the off-road and on-road vehicles, touring and racing cars, trucks and buggies. Aside from this, you can also choose on the size, color, type of car like Lamborghinis, Ferraris and Porsches. You also have an option to choose from gas powered or electric engine and if it’s a car or truck type.
The four main parts of radio controlled vehicles are the motor(s), transmitter, receiver and the power source.
Transmitter is the radio controller that you hold in your hand and usually powered by battery. The radio frequency let’s the transmitter relays the steering and controls the command you give to the receiver. Its receiver has two parts, the antenna and a circuit board inside the car. It receives the radio frequencies sent by the transmitter and relayed to the appropriate part of the vehicle.
Radio controlled vehicles features different type of engines. The motor is said to be the heart of the cars and is the most complex part of assembling your own RC car.
The nitro powered radio controlled motors has a 2-stroke or the less conventional 4-stroke version. The most popular is the 2-stroke motor because of its amazing 2.5 hp of output it produces. RC racers love the high speed and acceleration of this 2-stroke motor.
The 2-stroke motor is the 23cc displacement engine and it requires a fuel oil mixture. It is more suitable in car racing and has the advantage of producing higher rpm’s. On the other hand, 4-stroke motor can run on straight fuel and has an oil reservoir on it. It is better for off-road use and has more power and torque. It is more applicable in a truck that runs on dirt or rough tracks.
The electric car runs quietly and is better suited in your neighborhood while the nitro powered motors lets you feel the real car on racetracks. Electric radio controlled cars and trucks uses rechargeable batteries to run or power the motor and steering, which is usually runs for about 5-10 minutes. In terms of speed, electric motor vehicles have a great deal of pickup though not as much as nitro powered motors.
At first, electric RC cars can be much less expensive than a nitro powered vehicle. But there are other costs like additional battery packs, battery charger and other accessory the will add to the cost. Still, it depends on the kind of car you purchase and the battery pack that it requires. Of course for a good performance, you will purchase the good battery packs and good charger to save replacing cheaper batteries.
The good thing in electric motors is it doesn’t need much maintenance and tuning of its engine compare to nitro powered motor. It is more suitable for beginners because it only needs proper conditioning and proper storage of battery packs that will keep your RC cars running smoothly for years.
In addition, the motors come with or without a pull start. Those with pull start are cheaper, but you still need a starter box.
About the Author
Interested in allergic reactions to wasp stings? Visit the Wasp Stings website. For detailed information on long distance swimming, go to the History Of Swimming website. Stop by the Turtle Habitat website for details on sea turtle habitat.
E-Maxx 4×4 rc electric trucks RC racing trucks RC buggy off road RC racing
Mattel Football Online
Mattel Football Online
Top Public Relations Firms
Best Public Relations Firms
“They are who we thought they were”
As the Arizona Cardinals Head Football Coach Denis Green gave the world of press conferences a jewel that will last forever. As Coach Green erupted at the thought that someone in the media would think that they under estimated their opinionate the Chicago Bears, it really got me thinking about the power of perception.
The experiences of life have taught me that people will only treat you as well as they perceive you. Once their perception of you changes then the way they treat you will change as well.
I can remember back in when Jimmy Swaggart was on television in a tearful apology to his congregation for a scandal that had just made national news. Shortly after the story broke his church was nearly empty only after being full to capacity with thousands of worshipers.
The part that I always found interesting was that God knew the truth about Jimmy Swaggart before the congregation discovered the truth, and yet God still allowed the Church continue to grow and function normally.
It wasn’t until the congregation discovers the scandal that the church imploded. In the world of Public Relations there is really only one simple rule. It’s not who you are, it’s who people think you are that matters.
The good news is that perception can be influenced and persuaded, but it takes a lot of work to offset the damages. Now there are some exceptions in which the general public will decide for themselves if the claim is true or not regardless of how much money you spend defending yourself, such as the case with OJ Simpson.
If you have been attacked by a smear campaign and you are working on a limited budget then I would advise you to strongly consider a Personal Public Relations Firm, more commonly known as Reputation Management Firms.
Image Max specializes in management of information released about you, and your company to the general public. It other words Image Max is like having your own in house PR Department strategizing over how you are perceived in the general public. If it works for large corporations like Dell and Mattel, then why wouldn’t having your own public relation department benefit you?
Another Public Relations firm I want you to consider is Iron Clad Rep, you cans visit their site at www.ironcladrep.com
Here is the best part of partnering with Image Max, it’s affordable. The benefit of having your own Personal Public Relation Firm is that you now have a first line of defense against attacks from competitors, negative blog posts, or even a disgruntle customer.
You should control your own image and brand, please don’t leave it up to the World Wide Web to define who you are. In this day and age Google has become more then just an online search engine, it is now an unregulated verification service. Anyone can post anything, about anybody. Google has become the equivalent of the Wild Wild West without Wyatt Earp.
You can now expect that someone will Google your name in order to research your past, or merely to unearth content to use as gossip. One sure way of guarding your reputation is the use of a Reputation Management Firm such as Image Max.
Please remember “if it ever comes down to saving money or saving your name, always save your name”.
Tyrone Jacques
If you have been the victim of Online Slander and would like the negative items removed then please contact Image Max via their website at http://www.ironcladrep.com
About the Author
Thomas A. Rothstein would also like to invite you to visit our new website Image Max – for Online Reputation Management http://www.ironcladrep.com
¡¡Feliz Cumpleaños Fran y Raul!!
|
|
Pictionary Jr $16.99 Sixty seconds! That’s all the time you’ve got to draw a raccoon, pizza, or bowling ball. Pictionary Junior is the fun-filled game where clues are sketched and teammates have to quickly guess the word. And it’s designed especially for kids ages 7 to 12! Each card also has a theme that gives a hint to the word being sketched. You don’t have to be an artist to play – all you need is a little imaginat… |
|
|
Classic Football Handheld Game from Mattel Mattel’s 1977 handheld electronic football game proved a surprise hit that spawned numerous imitators. This replica (now with the word “classic” in the title) is a fun, inexpensive shot of nostalgia, though its design will be lost on new pigskin fans because this isn’t so much football, but a football-like exercise. The object of the game is to control a lone running back around LED defenders–lit… |
|
|
Mattel Classic Football 2 Game $16.99 Brand new in factory sealed box… |
Duratrax X-Large Deluxe Field Bag
Duratrax X-Large Deluxe Field Bag
|
|
Duratrax X-Large Deluxe Field Bag $55.42 … |
|
|
X-Large Deluxe Field Bag DTXP2010 Haul Your Goodies to the Track or Field with the Team DuraTrax XL Deluxe / Field Bag with Carrying Strap for Monster Trucks and 1/8 scale Gas Buggies. / / FEATURES: Sturdy and Good Looking Black Nylon Construction / Team DuraTrax Logo Silk Screened on the Bag / Sturdy Plastic Covered Cardboard Liner to Help Bag Hold Its Shape. / (one-piece that you fold for bottom and all four sides) / Handy Nylo… |
Mattel Elite Diecast
Mattel Elite Diecast
updated 1/18 FERRARI die-cast modelcar collection
|
|
Hot Wheels 2011-018 New Models 18/50 Back To The Future Time Machine 1:64 Scale $0.19 DIE CAST… |
|
|
HOT WHEELS 2010 NEW MODELS 25 OF 44 GHOSTBUSTERS ECTO-1 WHITE WAGON $14.24 With rear pull-out rack, proton packs and a distinctive wail, this refitted ’59 Cadillac was made for fighting slime…. |
|
|
2011 Hot Wheels A Team Van Black #39/244 $0.02 … |
|
|
Hot Wheels 1/18 Ferrari 512 M die-cast red $56.43 Faithful reproduction of the Ferrari 512 M scale 1:18 produced by Hot Wheels®… |
|
|
Hot Wheels 1/18 Ferrari 250 GT Elite Version die-cast red $105.81 The Ferrari 250 GT is one of the most beautiful car ever produced in Maranello. This a perfect 1:18 scale replica of this historical model. All details of this car have been carefully designed in order to satisfy all Ferrari collectors’ expectations…. |
|
|
Hot Wheels 1/18 Ferrari F40 Version die-cast red The Ferrari F40 is a special edition produced on the occasion of Ferrari’s 40th anniversary. This terrific supercar was produced by Ferrari from 1987 to 1992 as the successor to the GTO, with which it shared some parts. The Ferrari F40 was the last car to be commissioned by Enzo. He wanted a new project to remind the world of the company’s capabilities as a manufacturer. The Ferrari F40 is a vehic… |
Mattel Jeff Hardy
Mattel Jeff Hardy
Jeff Hardy Mattel Elite Tna 2010 Customs
|
|
WWE UNDISPUTED CHAMPIONSHIP DELUXE REPLICA WRESTLING BELT $399.00 WWE UNDISPUTED CHAMPIONSHIP DELUXE REPLICA WRESTLING BELT… |
|
|
WWE DIVAS Championship Adult Size Official Replica BELT $299.00 Brand New Officially Licensed by WWE WWE DIVAS CHAMPIONSHIP ADULT SIZE REPLICA BELT This is the Officially Licensed WWE DIVAS Championship Full Size Exact Replica Belt It is taken from a mold of the ORIGINAL Belt It is the same thickness and length as the original belt It measures 3 feet 9 inches inches in length Weighs almost 5 lbs The Metal center medallion measures 10 inches wide by 8 … |
|
|
Table & Ladder for WWE Jakks Mattel Wrestling Action Figures $8.85 Items are brand new. Table will be brown or black…. |
|
|
World Wrestling Entertainment Money In The Bank Ladder Match Ring $19.95 Climb your way to victory in this Superstar ring replicating WWE’s memorable “Money in the Bank” ladder match. Recreate all the knockdown, high-flying excitement with a retractable TitanTron screen, lights and sounds and 3 action points to launch your FlexForce figures into the ring. Includes a ladder, speakers and a briefcase with a contract inside just like the one from the real match. Figures N… |
|
|
WWE Sheamus 2009 Survivor Series Figure – Heritage Series PPV #10 $10.99 SHEAMUS – WWE PAY PER VIEW 11 WWE TOY WRESTLING ACTION FIGURE… |
Exceed Rc 2.4ghz Madhawk 300
Exceed Rc 2.4ghz Madhawk 300
Exceed Rc MadHawk 300 RC Flight Reviews
|
|
Exceed RC 2.4Ghz MadHawk 300 4-Channel Radio Remote Control RC Helicopter RTF Fixed Pitch – 100% Ready-to-Fly w/ Lipo Battery (Red) This is the latest 2.4Ghz Exceed RC MadHawk 300 AirWolf, installed with new version receiver RX-2423, come in Ready-To-Fly package with all the necessary items inside. Its overall length is 460mm, compact swashplate structure is adopted and with light and fine fuselage, it is super stable to fly! High performance 370SH motor powered by 7.4V 1000mAh Lipo offers 10- to 12-minute flight time, dependi… |
|
|
Exceed RC 2.4Ghz MadHawk 300 4-Channel Radio Remote Control RC Helicopter RTF Fixed Pitch – 100% Ready-to-Fly w/ Lipo Battery (Black)- OR NEXT COLOR AVAILABLE SENT AT RANDOM Product Description This is the latest 2.4Ghz Exceed RC MadHawk 300 AirWolf, installed with new version receiver RX-2423, come in Ready-To-Fly package with all the necessary items inside. Its overall length is 460mm, compact swashplate structure is adopted and with light and fine fuselage, it is super stable to fly! High performance 370SH motor powered by 7.4V 1000mAh Lipo offers 10- to 12-minute … |
|
|
Exceed RC 2.4Ghz MadHawk 300 4-Channel Radio Remote Control RC Helicopter RTF Fixed Pitch – 100% Ready-to-Fly w/ Lipo Battery (Camo Desert)- OR NEXT COLOR AVAILABLE SENT AT RANDOM Product Description This is the latest 2.4Ghz Exceed RC MadHawk 300 AirWolf, installed with new version receiver RX-2423, come in Ready-To-Fly package with all the necessary items inside. Its overall length is 460mm, compact swashplate structure is adopted and with light and fine fuselage, it is super stable to fly! High performance 370SH motor powered by 7.4V 1000mAh Lipo offers 10- to 12-minute … |
